Gelli Arts® Gel Printing on DIY Clay Ornaments

Hi there! It’s Marsha here
today. Springtime is here in the Northern Hemisphere. In the Netherlands that
means the first bulbs have already bloomed, and I can finally buy blossom
branches at the florists and the supermarket flower stalls.

I usually don’t decorate the
branches, but Easter is coming up, so I thought I’d try my hand at creating gel
printed ornaments made from air-drying clay.

The ornaments are super easy
to make. I used a cookie cutter shaped like an egg, but with the right cutter,
you can customize the ornaments to fit virtually any holiday or occasion.

Step 1

Roll the air-drying clay out
until it’s about 1/8 inch thick. Move the clay to a non-stick surface like a
sheet of baking parchment or a smooth ceramic tile.

Step 2

Use a clay or cookie cutter
to cut shapes. Please don’t use the cookie cutter for edibles after you’ve used
it on clay.

Step 3

Smooth the edges of the clay
shapes by running a wet finger along them.

Step 4

Poke a hole at the top of
each shape using a drinking straw or a small tube.

Step 5

Leave the clay shapes to
dry. Drying time can take several hours to several days depending on the
climate.

Check regularly to ensure
they dry as flat as possible. If the shapes do warp, you can easily flatten
them by pushing them down with a flat hand or by placing something like a
smooth ceramic tile on top.

Step 6

As soon as the clay is dry,
you can start printing!

You can use all of your
favorite mark making tools and methods on the gel printing plate of your
choice. The size of the plate depends on how many shapes you’d like to print on
in one go.

You can print on both sides
of the clay shape. I chose to work with the 5”x7” Gelli Arts® gel printing
plate because I could fit my clay shape on there twice. So if I wanted I could
print the front and the back of the shape with the same layer of paint from my plate.

My clay shapes are only 3”
tall, so I specifically looked for stencils that have patterns to fit that
small scale.

Use tissue paper to lift
paint from the plate. You can carefully clean your brayer on the same paper
too. Keep the tissue paper aside to use for collage later on.

Keep layering the prints on
the clay shapes until you are happy with the results.

Step 7

Dab a drop of paint on a
cosmetic sponge and run it along the edges of the clay shapes if you’d like to
get rid of the white clay trim.

Use matte medium or
decoupage glue to collage snippets of your tissue paper onto the clay shapes.
The thin paper will add more layers to the clay shapes without adding any bulk.
The adhesive will turn the white tissue almost transparent, and the collaged
pieces will blend with the gel printed background.

Another way you can adorn
your mixed media ornaments is with paint pen markers and doodles.

Step 8

Finish your mixed media
ornaments by threading a pretty coordinating ribbon through the holes!

Happy printing on clay!

Marsha.

Materials:

Gelli Arts®:

-5”x7” Gelli Arts® Gel
Printing Plate

-4” Roller

Other:

-Air-drying Clay

-Non-stick Surface

-Clay Roller

-Cookie or Clay Cutter (3”)

-Drinking Straw or Small
Tube

-Acrylic Paint

-Stencils

-White Tissue Paper

-Matte Medium or Decoupage
Glue

-Flat Brush

-Cosmetic Sponge

-Paint Markers

-Ribbon (Sara’s Saris by
Sara Ferret)


© 2019 by Gelli Arts®, LLC
Philadelphia, PA All rights reserved.

3 thoughts on “Gelli Arts® Gel Printing on DIY Clay Ornaments”

  1. sewzallsquirrels

    These are so cool. Your designs from stencils were a good choice but then the further collaging and pen work made them so nice. Will now go get started! Thanks.

Leave a Reply

%d bloggers like this: