Hi there! It’s Marsha here today, and I’m going to show you
how to create super fun, inexpensive DIY chipboard texture plates that you can
use for monoprinting over and over again.
I learned how to make chipboard texture plates when I was
around the age of 6 or 7, and my first one was of Puss in Boots.
This technique is not just for kids though! It’s very
versatile, and can be adapted to any theme or subject you like.
But as Halloween is coming up very soon, I think a couple of
scary portraits are in order. Besides, they are great fun to create!
Take two sheets of thin chipboard (greyboard). Make sure
it’s smooth chipboard that doesn’t tear but leaves a nice dent when you press a
pencil or a ballpoint pen into it.
Cut one sheet to the size of the gel printing plate you are
going to use. I’ve chosen to work with the 9”x12” Gelli Arts® gel printing
plate because it’s perfect for bleed prints on A4 and Letter size papers.
Cut the other sheet of chipboard to the size of the paper
you want to print on. I’m printing on A4 sized drawing paper, so I cut my
second sheet of chipboard to 5,8” x 8,3”.
If your paper is larger than your gel printing plate, then
cut both sheets of chipboard to the size of the plate.
Decide on an image you would like to monoprint. Sketch a
draft if you want.
As said before, the subject can be anything you like, just as
long as you make sure the main parts can be cut up into separate shapes.
Try to keep the main shapes as simple as possible and save
the details for the insides of these shapes. Inside the shapes, you can go as
detailed as you want!
Sketch the image onto the sheet of chipboard the same size
as your paper.
Trace the lines of the image with a pen or a marker. Use a
ballpoint pen to trace the details on the insides of the main shapes.
Make sure that you press the ballpoint pen firmly into the
chipboard and retrace each line to create a dent. The lines you draw are going
to show up in the monoprint.
Cut the main shapes. Look for features (like eyes, mouths,
windows, etc.) you can cut out of the main forms too. Use a craft knife to cut
these or, if you are creating with kids, let them use a piercer to pinprick
Reassemble your image on top of the second sheet of
chipboard. Make sure the image is centered before you adhere all of the cutout
parts to the background sheet.
Let the adhesive dry completely.
Place the Gelli Arts® gel printing plate of your choice on a
smooth, flat surface.
Roll a drop (or two) of acrylic paint out on the plate with
Press the chipboard texture plate into the paint. Lift the
You can place your paper on top of the plate right away and
rub with your hands to transfer the paint to the paper.
Or you can wait until the paint has dried on the plate,
apply a thin second layer of paint, place your paper on top of the plate and
then pull a ghost print.
For the best results, use dark paint colors for the first
layer and light paint colors for the second.
The traditional Halloween colors don’t mix very well because
they are secondary colors. So if you use them together on one print, the layers
may not always come out as imagined, especially when you are working with
If you do want to use purple, orange, or green, then pair it
with a neutral or with a tint or shade of the same color. You can also make
sure the paints you choose are opaque instead of transparent.
9”x12” Gelli Arts® Gel Printing Plate
Gelli Arts® 4” Brayer
Thin Chipboard (9”x12” and 5,8”x8,3”)
Paper to Print on (Drawing Paper 160g/m2 A4 size 5,8”x8,3”)
Acrylic Paint (Royal Talens Amsterdam)
© 2018 by Gelli Arts®, LLC
Philadelphia, PA All rights reserved.