If you’re eyeing your pile of gel prints and scraps, wondering what you might do with all that luscious paper…think papier-mâché bowls! What a great way to create something fun and functional using papers from your Gelli Arts® stash!
Papier-mâché bowls have been around for ages. They range from children’s school projects to fine art objects, and everything in between. Perfect inspiration for ALL of us!
There are so many ways to approach this project. You can tear or cut your prints into small pieces or strips, or punch shapes—depending on the look you’re going for. You’ll need plenty of small pieces of Gelli® made prints! Thin paper, like copy paper works great! All of the gel printed snippets used here are from prints made on plain copy paper.
To make a durable bowl, you’ll also need to prepare torn pieces of ‘filler’ paper for building up layers. Newspaper is commonly used for making paper mache. I have loads of old book pages that are perfect for this purpose, so that’s what I used—along with unprinted newsprint paper.
TIP: Tear your paper into small pieces for a smoother bowl surface. Larger paper pieces can form lumpy folds and creases as it’s applied to the curved surface.
To keep things simple, I chose Mod Podge for the adhesive—thinned down with a little water. There are many suitable adhesives and mediums you can use, such as matte medium or diluted white glue. Paste recipes are easy to find on the internet if you’re inclined to make your own.
To begin, you need a form for the structure of your paper mache bowl. You can select a bowl with a shape you like, then tightly encase it in plastic wrap—but be warned: it can be a real challenge to remove the dried paper mache bowl intact. I find using a flexible plastic bowl much easier to work with than a rigid one. But my hands-down favorite form is a balloon. So that’s the process described here.
Creating your bowl is a simple process, but it does take patience! Here’s what to do:
- Blow up a balloon and tie a knot. Place the balloon in a cup to stabilize it. It helps to secure the balloon to the cup with tape.
- Pour some Mod Podge into a dish and stir in a little water, thinning it to the consistency of heavy cream. A foam brush is good for applying the adhesive, but I prefer to wear disposable gloves and use my hands.
- Apply adhesive to a small piece of torn paper and smooth it onto the surface of the balloon, removing any air bubbles under the paper. Begin at the top of the balloon. Continue applying adhesive to each paper piece and placing onto the balloon, slightly overlapping the previous piece of paper. Do this until you create a solid layer that entirely covers the area of the balloon, forming the shape of your bowl.
- Allow the first layer to dry. Then add another layer. Build up layers, letting each one dry before adding the next. Each layer adds strength, and 5-6 layers should give you a bowl with a nice sturdy feel. Then let it dry overnight.
- To remove the completely dry bowl, simply pop the balloon! Take the deflated balloon out, revealing a smooth surface on the inside of your bowl.
- Trim along the edge with scissors to create an even rim. Or, if you prefer, leave the edge as-is for a more organic look. If you wish to paint the bowl, it’s ready now!
The Gelli Arts® printed pieces are the last layer. Arrange the cut, torn or punched pieces and glue them to the bowl. Decorate the surfaces of the bowl, as you like. Let it dry, then varnish with a few more layers of Mod Podge or your favorite medium.
Pictured below is a bowl created on a large, fairly rigid plastic bowl. It was a little tricky to remove it when the paper mache was dry. Prying it off carefully and gently with a plastic palette knife worked best.
To decorate bowls like these, draw leaf shapes on many pieces of gel printed paper using a copper Montana Acrylic Paint marker (Fine—2mm). With a black Montana marker (Fine—2mm), add dots around each shape. Each black dot is layered with a small white dot from a Montana marker (Extra-Fine—0.7mm). Then cut out each small leaf shape with scissors. It’s a slow, detailed process—quite like a meditation!
A few considerations: Keep in mind, the underside of the first layer will show as the ‘inside’ of the bowl. If you want the smooth interior of the bowl to be made up of pieces of gel prints, use those for the first layer of printed papers, placed face down on the balloon.
To make the different layers obvious while applying the small pieces of paper, I alternate layers of book pages and unprinted newsprint paper. This is by no means necessary, but it helps me see exactly where I am while creating each layer. It’s easy to see if a spot was missed!
You can add a thin layer of molding paste or spackle to smooth out any lumpy areas. I use
Golden Hard Molding Paste, basically as a skim coat. I apply it with gloved hands and smooth it into a thin, even coat.
Once your paper mache bowl is decorated and dry, you may want to continue working on the surfaces. Add more collage elements, paint, stenciling, doodles or journaling to your bowls! The creative possibilities are endless!
So much fun! Try it!!! And share your photos with us on the Gelli Arts® Facebook page showing what you’ve made! We love featuring creative works by our Gelli Arts® fans!!! We also love reading your thoughts and feedback, so please leave a comment! Thanks!