Gelli® prints make great tags, cards and ATCs! Watch this video demonstration for ideas on creating fun small prints!
When you print on paper that’s smaller than the painted gel plate, you’re creating a bleed print. That means the printed image is the entire paper, right up to and including the edges … no borders.
Making a bleed print — or in this case, printing tags — couldn’t be easier:
- Place your tags on the painted gel plate
- Place a cover sheet over the plate
- Rub to transfer the paint
- Remove the cover sheet
- Pull your printed tags
The cover sheet picks up the paint from the areas on the plate that weren’t covered by the tag. In fact, the cover sheet is a masked print of the negative space around the tags.
Also — use the cover sheets to pick up the ghost image after the tags are removed … and you’ll see how interesting cover sheets can become!
Cover sheets make great beginnings, so keep using them over and over.
And here’s a fun technique for adding rubber stamped images to gel printed tags!
This technique calls for some unprinted areas on your tags. You can achieve this simply with torn paper masks. Follow these easy steps for fun results!
- Apply acrylic paint to the plate and roll out with a brayer.
- Place torn pieces of paper (masks) onto the painted plate, which will create unprinted areas in your print.
- Leave masks on the plate and place the tags onto the painted plate.
- Cover the plate with a sheet of paper that’s larger than the plate.
- Rub the paper to transfer the paint — and remove the cover sheet. (keep using the cover sheet as long as the paint is dry)
- Remove the tags and let the paint dry completely.
TIP: Acrylic paint acts as a resist. It must be completely dry before continuing to the next step.
With a damp paper towel, wipe stamped ink off the acrylic paint. Acrylic paint resists the stamp pad ink, and the stamped image will remain only in the masked area.
Note: The stamp ink may smear or blend into the unpainted paper, giving it color! The stamp image remains.
It’s fun to continue embellishing the stamp images with colored pencils or markers. But for special glittery effects, try the Wink of Stella brush pens by Zig! They add a subtle touch of superfine glitter … and offer the easiest way to add some sparkle to your print! With no mess! The brush tip allows for delicate lines as well as broader coverage. They can lend a touch of magic to a small print, like a tag!
Want to give it a try? Our extra-fun giveaway will have you making sparkly tags in no time!
This Contest is officially CLOSED
We have a winner! The random generator picked Vicki Romaine! Congrats to Vicki and a huge THANKS to all who commented and shared their fun artwork with us over the past few days on our FB page. Wishing everyone a happy and safe holiday season!
This fabulous prize package includes:
- One (1) — 6″ x 6″ Gelli Arts® Gel Printing Plate
- One (1) — Speedball 4″ Soft Rubber Pop-In Brayer
- One (1) — set of three (3) Wink of Stella Brush Markers
- One (1) — set of four (4) clear stamps by Inkadinkadoo
- One (1) — Distress Ink Pad
- Two (2) — Rubbing Plates by Cedar Canyon
- Twenty (20) — Blank Manilla Tags
To enter, all you need to do is leave a comment HERE ON THE BLOG!!
Comments (as your entry!) will be accepted until 12pm (noon) EST Monday, December 23rd. Leave your comment NOW!!
This Contest is officially CLOSED
have a winner! The random generator picked Vicki Romaine! Congrats to
Vicki and a huge THANKS to all who commented and shared their fun
artwork with us over the past few days on our FB page.
One lucky winner will be selected AT RANDOM and announced no later than 5pm EST on Monday, December 23rd. The winner will be announced here on the blog and on our Facebook page!
For more wonderful examples of Gelli printed Tags or ATC’s, check out our Pinterest Boards loaded with thousands of examples from Gelli printers who live all over the world. Please share your Gelli printed Tags or ATC’s with us on Facebook too!
Good luck … and Happy Printing!